That is why this list is here.
Preflight through Engine Start
Covers the Preflight check up through starting the engine under various conditions.
Covers the V-speeds engine running ground check, run up, various take offs, descent, approach and landing phases.
Emergency procedures directly from the POH.
This is an Excel based spreadsheet to calculate density altitude, and, based on your plane's sea level takeoff distance and rate of climb, calculates both at density altitude. The spreadsheet calculations are based on the famous and now lost Airman Mike's Density Altitude Page.
This Excel based Flight Log is based on the Jeppensen hardcopy log. The LOG sheet is just like the Jeppensen hardcopy. It has "pages" with the same capacity as the hardcopy. You will need to keep copying the last blank page to add more capacity. The LOG.v2 sheet is a linear list of the identical columns as on the LOG sheet, but without pagination. The totals are kept at the top. Sheets are included for BFR, Medical, Landings, Oil, Maintenance, Compression, and Endorsements. Obviously, signatures are not captured, but at least you will have a record should your paper logbook be destroyed.
This Excel based Navigation log workbook has worksheets for course, weather log, climb performance, weight & balance calculations, manuvering speed (Va) calculation, and stall speeds (Vs0, Vs1) calculation. These calculations are all easily customizable for your particular plane.
My lawyer demands that I include a disclaimer on the use of this Navigation Log. This log is presented "as is" and no claims are made for its accuracy or safety. Use it at your own risk.
If you can print duplex the course sheet and weatherlog are on different sides of the same sheet. Course sheet has Checkpoints, Altitude, Wind Calculations, TC, TH, MH, CH, Distance, Ground Speed, ETA, Fuel consumption, Airport and ATIS/AWOS/ASOS information.
I copy the leg sheet for each leg that ends in a landing. For example on a recent flight I had 5 Navigation Log sheets in the workbook, S43-CLM, CLM-11S, 11S-UIL, UIL-HQM,HQM-S43.
The shaded cells are calculated for you. The sheets are protected, but there is no password, so you can unprotect them and change them.
Here is a Navigation Log Example.
Some things of note from the first sheet, S43-CLM. The Weight and CG Pos. are calculated on the W&B sheet and displayed here. Va, Vs0, and Vs1 are calculated on the Va and Vs sheets and entered here. The T/O Climb values are calculated from the climb chart to make the first altitude. The Leg-climb is actually Leg "minus" Climb, meaning the level flight portion of the flight from the takeoff checkpoint to the second checkpoint. If you can't make the intended altitude with your plane's performance (CAS and Climb performance) these values will be negative.
Note that the Total Fuel value on subsequent logs is inherited from the log before. This is not automatic - you must remember to do this by hand.
There a couple of Hobbs fields, one for in and on for out. There are places to write the ATC Frequencies and the transponder codes.
Check the 11S-UIL sheet and you will see F 151 and T 326 under the UIL Checkpoint. Note also the TOU and HQM VOR entries. F 151 is the VOR radial FROM the TOU VOR, and T 326 is the VOR radial TO the HQM VOR. Just a hint on how you might use your log.
The table on the Climb sheet must be filled in with the data for your plane. Generally this data is available in your POH. If you change the dimensions of the table, that is, add or subtract rows, you will need to adjust the range of the LOOKUP function for the T/O Climb cells.
The W&B table will need to be adjusted for your own plane. The chart, which is simply a visual aid will also need to be adjusted, deleted, or ignored.
The Va and Vs sheets will also need to be adjusted for your plane. Generally this data is available in your POH. The POH for my Warrior has Va and Vs charts. A linear approximation to my POH charts was close enough.